HP VPN Firewall Appliances Network Management Command Reference

875
Field Descri
p
tion
Peer optional capabilities:
Peer support bgp multi-protocol
extended
Peer support bgp route refresh
capability
Peer support bgp route AS4 capability
Optional capabilities supported by the BGP peer:
• Multi-protocol extension for BGP.
• Route-refresh feature.
• 4-byte AS number.
Graceful Restart Capability: advertised
and received
Restart Timer Value of Peer: 150
seconds
Forwarding State preserved by Peer
for following Address families:
GR capability: the advertising and receiving capabilities have been
successfully negotiated.
• GR restart timer of the peer is 150 seconds.
• Address family information for which the peer preserves the
forwarding state.
Address family IPv6 Unicast: advertised
and received
BGP IPv6 unicast capability: the advertising and receiving
capabilities have been successfully negotiated.
Threshold
Threshold of the routes received from the peer (ratio of the number of
received routes to the configured upper limit in percentage) when an
alarm is generated.
Minimum time between advertisement
runs is 30 seconds
Minimum interval between advertisements.
Optional capabilities
Route refresh capability has been
enabled
ORF advertise capability based on
prefix (type 64):
Local: both
Negotiated: send
Optional capabilities enabled on the peer:
• Route-refresh is enabled.
• The IPv6 BGP peer supports the ORF capability based on IP
prefix. The capability value is 64.
• The local IPv6 BGP router supports both the ORF sending and
receiving capabilities.
• Negotiation result means that the local IPv6 BGP router can send
Router-refresh messages carrying the ORF information, and the
peer can receive Router-refresh messages carrying the ORF
information. (If receive is displayed, the local BGP router can
receive Router-refresh messages carrying the ORF information,
and the peer can send Router-refresh messages carrying the ORF
information. This field is not displayed if neither the send nor the
receive capability is supported.
Peer Preferred Value Preferred value assigned to routes received from the peer.
IPsec policy name: policy001, SPI: 300 IPsec policy applied to the peer and SPI of the IPsec policy.
BFD
BFD status:
• Enabled.
• Disabled.
# Display the log information of the IPv6 peer 20::21.
<Sysname> display bgp ipv6 peer 20::21 log-info
Peer : 20::21
Date Time State Notification