HP VPN Firewall Appliances Network Management Command Reference

876
Error/SubError
10-Jul-2008 15:46:17 Down Send Notification with Error 1/1
Message Header Error/Connection Not Synchronized
10-Jul-2008 09:23:00 Up
10-Jul-2008 07:46:17 Down Receive Notification with Error 3/2
UPDATE Message Error/Unsupported optional Parameter
10-Jul-2008 06:23:00 Up
10-Jul-2008 05:46:17 Down Send Notification with Error 6/4
Administrative Reset
Table 202 Command output
Field Descri
p
tion
Peer IPv6 address of the peer.
Date Date on which the Notification was sent or received.
Time Time at which the Notification was sent or received.
State
BGP session state:
• Up—Indicates that the BGP session is up.
• Down—Indicates that the BGP session is down.
Notification Notification message.
Error/SubError
Error refers to the error code, which identifies the type of the Notification.
SubError refers to the error subcode of the Notification, which identifies the specific
information about the reported error.
display bgp ipv6 peer received ipv6-prefix
Use display bgp ipv6 peer received ipv6-prefix to display the prefix entries in the ORF information of the
specified BGP peer.
Syntax
display bgp ipv6 peer { ip-address | ipv6-address } received ipv6-prefix [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ip-address: IP address of a BGP peer.
ipv6-address: IPv6 address of a BGP peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.