HP VPN Firewall Appliances Network Management Command Reference

889
filter-policy export (IPv6 address family view/IPv6 BGP-VPN
instance view)
Use filter-policy export to filter outbound routes using a specified filter.
Use undo filter-policy export to cancel filtering outbound routes.
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ protocol process-id ]
undo filter-policy export [ protocol process-id ]
Default
No outbound routing information is filtered.
Views
IPv6 address family view, IPv6 BGP-VPN instance view
Default command level
2: System level
Parameters
acl6-number: Specifies the number of an ACL6 used to match against the destination of routing
information. The number is in the range of 2000 to 3999.
ipv6-prefix-name: Specifies the name of an IPv6 prefix list used to match against the destination of
routing information. The name is a string of 1 to 19 characters.
protocol: Filters routes redistributed from the routing protocol. It can be direct, isisv6, ospfv3, ripng, or
static. If no protocol is specified, all routes will be filtered when advertised.
The following matrix shows the values for the protocol argument on different firewalls and firewall
modules:
Hardware Protocol ke
y
words
F1000-A-EI/F1000-S-EI direct, ospfv3, ripng, and static
F1000-E direct, ospfv3, ripng, and static
F5000 direct, isisv6, ospfv3, ripng, and static
F5000-S/F5000-C direct, ospfv3, ripng, and static
VPN firewall modules direct, ospfv3, ripng, and static
20-Gbps VPN firewall modules direct, ospfv3, ripng, and static
process-id: Process ID of the routing protocol, in the range of 1 to 65535. It is available only when the
protocol is isisv6, ospfv3, or ripng.
Usage guidelines
If a protocol is specified, only routes redistributed from the specified protocol are filtered. If no protocol
is specified, all redistributed routes will be filtered.
To reference an advanced ACL (with a number from 3000 to 3999) in the command, configure the ACL
in one of the following ways: