HP VPN Firewall Appliances Network Management Command Reference

893
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] import-route ripng 1
ipv6-family
Use ipv6-family to enter IPv6 address family view.
Use undo ipv6-family to remove all configurations from the IPv6 address family view.
Use ipv6-family vpn-instance vpn-instance-name to enter IPv6 BGP-VPN instance view.
Use undo ipv6-family vpn-instance vpn-instance-name to remove all configurations from the IPv6
BGP-VPN instance view.
Syntax
ipv6-family [ vpn-instance vpn-instance-name ]
undo ipv6-family [ vpn-instance vpn-instance-name ]
Views
BGP view
Default command level
2: System level
Parameters
vpn-instance vpn-instance-name: Enters IPv6 BGP-VPN instance view. vpn-instance-name is a
case-sensitive string of 1 to 31 characters.
Usage guidelines
Before entering IPv6 BGP-VPN instance view, you must create the VPN instance.
Examples
# Enter IPv6 address family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6]
# Enter IPv6 BGP-VPN instance view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family vpn-instance vpn1
[Sysname-bgp-ipv6-vpn1]
network (IPv6 address family view/IPv6 BGP-VPN instance
view)
Use network to advertise a network to the IPv6 BGP routing table.
Use undo network to remove an entry from the IPv6 BGP routing table.