HP VPN Firewall Appliances Network Management Command Reference

898
Views
IPv6 address family view
Default command level
2: System level
Parameters
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer.
ipv6-address: IPv6 address of a peer.
as-path-acl-number: Number of an AS path list, in the range of 1 to 256.
import: Filters incoming routes.
export: Filters outgoing routes.
Examples
# Specify the AS path list 3 to filter routes outgoing to the peer 1:2::3:4.
<Sysname> system-view
[Sysname] ip as-path 3 permit ^200
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-path-acl 3 export
peer bfd (IPv6 address family view/IPv6 BGP-VPN instance
view)
Use peer bfd to enable BFD over the link to a BGP peer.
Use undo peer bfd to restore the default.
Syntax
peer ipv6-address bfd
undo peer ipv6-address bfd
Default
BFD is not enabled for any BGP peer.
Views
IPv6 address family view, IPv6 BGP-VPN instance view
Default command level
2: System level
Parameters
ipv6-address: IPv6 address of a peer.
Usage guidelines
The following matrix shows the peer bfd command and hardware compatibility: