HP VPN Firewall Appliances Network Management Command Reference

899
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 Yes
F5000-S/F5000-C No
VPN firewall modules No
20-Gbps VPN firewall modules No
Examples
# Enable BFD over the link to BGP peer 100::1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname] ipv6-family
[Sysname-bgp-af-ipv6] peer 100::1 bfd
peer capability-advertise orf
Use peer capability-advertise orf to enable the ORF capability for a BGP peer or peer group.
Use undo peer capability-advertise orf to disable the ORF capability for the BGP peer or peer group.
Syntax
peer { group-name | ip-address | ipv6-address } capability-advertise orf ipv6-prefix { both | receive |
send }
undo peer { group-name | ip-address | ipv6-address } capability-advertise orf ipv6-prefix { both |
receive | send }
Default
The ORF capability is not enabled for a BGP peer or peer group.
Views
IPv6 address family view
Default command level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
ipv6-address: IPv6 address of a peer.
both: Supports sending and receiving route-refresh messages carrying the ORF information.
receive: Supports receiving route-refresh messages carrying the ORF information.
send: Supports sending route-refresh messages carrying the ORF information.