HP VPN Firewall Appliances Network Management Command Reference

900
Usage guidelines
After you enable the ORF capability, the local BGP router negotiates the ORF capability with the BGP
peer through Open messages. After that, the BGP router can process route-refresh messages carrying the
standard ORF information from the peer or send route-refresh messages carrying the standard ORF
information to the peer. For non-standard ORF capability negotiation, you need also to configure the
peer capability-advertise orf non-standard command.
After you disable the ORF capability, the local BGP router does not negotiate the ORF capability with the
specified peer or peer group.
Table 209 Description of the both, send, and receive parameters and the negotiation result
Local
p
arameter Peer
p
arameter Ne
g
otiation result
send
• receive
• both
The ORF sending capability is enabled locally and
the ORF receiving capability is enabled on the peer.
receive
• send
• both
The ORF receiving capability is enabled locally and
the ORF sending capability is enabled on the peer.
both both
Both the ORF sending and receiving capabilities are
enabled locally and on the peer.
Examples
# Enable the ORF capability for the BGP peer 1:2::3:4. Then, after negotiation, the local router can
exchange ORF information with the peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100
[Sysname-bgp-af-ipv6] peer 1:2::3:4 capability-advertise orf ipv6-prefix both
peer capability-advertise orf non-standard (IPv6 address family
view)
Use peer capability-advertise orf non-standard to enable the non-standard ORF capability (the early
implementation of ORF is different from that defined in RFC) for a BGP peer or peer group.
Use undo peer capability-advertise orf non-standard to disable the non-standard ORF capability for the
BGP peer or peer group.
Syntax
peer { group-name | ipv6-address } capability-advertise orf non-standard
undo peer { group-name | ipv6-address } capability-advertise orf non-standard
Default
The non-standard ORF capability is not enabled for a BGP peer or peer group.
Views
IPv6 address family view
Default command level
2: System level