HP VPN Firewall Appliances Network Management Command Reference

910
Examples
# Terminate the session with peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 ignore
peer ipv6-prefix
Use peer ipv6-prefix to specify an IPv6 prefix list to filter routes incoming from or outgoing to a peer or
peer group.
Use undo peer ipv6-prefix to remove the configuration.
Syntax
peer { group-name | ipv4-address | ipv6-address } ipv6-prefix ipv6-prefix-name { import | export }
undo peer { group-name | ipv4-address | ipv6-address } ipv6-prefix { import | export }
Default
No IPv6 prefix list is specified for filtering.
Views
IPv6 address family view
Default command level
2: System level
Parameters
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer.
ipv6-address: IPv6 address of a peer.
ipv6-prefix-name: IPv6 prefix list name, a string of 1 to 19 characters.
import: Applies the filtering policy to routes received from the specified peer/peer group.
export: Applies the filtering policy to routes advertised to the specified peer/peer group.
Examples
# Reference the IPv6 prefix list list1 to filter routes outgoing to peer 1:2::3:4.
<Sysname> system-view
[Sysname] ip ipv6-prefix list1 permit 2002:: 64
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 ipv6-prefix list1 export
peer ipsec-policy (IPv6 address family view)
Use peer ipsec-policy to apply an IPsec policy to an IPv6 BGP peer or peer group.
Use undo peer ipsec-policy to remove the applied IPsec policy.