HP VPN Firewall Appliances Network Management Command Reference

915
• On the peer device:
<Sysname> system-view
[Sysname] bgp 4
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:3 password cipher aabbcc
peer preferred-value (IPv6 address family view)
Use peer preferred-value to assign a preferred value to routes received from a peer or peer group.
Use undo peer preferred-value to restore the default.
Syntax
peer { ipv6-group-name | ipv6-address } preferred-value value
undo peer { ipv6-group-name | ipv6-address } preferred-value
Default
Routes received from a peer or peer group have a preferred value of 0.
Views
IPv6 address family view
Default command level
2: System level
Parameters
ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
value: Preferred value, in the range of 0 to 65535.
Usage guidelines
Routes learned from peers each have an initial preferred value. Among multiple routes to the same
destination, the route with the biggest value is selected.
If you both reference a routing policy and use the command peer { ipv6-group-name | ipv6-address }
preferred-value value to set a preferred value for routes from a peer, the routing policy sets the specific
preferred value for routes matching it. If the preferred value in the routing policy is zero, the routes use the
value set with the peer { ipv6-group-name | ipv6-address } preferred-value value command. For
information about using a routing policy to set a preferred value, see commands peer { group-name |
ipv4-address | ipv6-address } route-policy route-policy-name { import | export } and apply
preferred-value preferred-value.
Examples
# Configure the preferred value as 50 for routes from peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 preferred-value 50