HP VPN Firewall Appliances Network Management Command Reference

917
Default
BGP updates carry the private AS number.
Views
IPv6 address family view
Default command level
2: System level
Parameters
ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
Usage guidelines
The command does not take effect if the BGP update has both the public AS number and private AS
number. The range of private AS number is from 64512 to 65535.
Examples
# Configure BGP updates sent to the peer 1:2::3:4 to not carry private AS numbers.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 public-as-only
peer reflect-client (IPv6 address family view)
Use peer reflect-client to configure the router as a route reflector and to specify a peer/peer group as a
client.
Use undo peer reflect-client to remove the configuration.
Syntax
peer { group-name | ipv4-address | ipv6-address } reflect-client
undo peer { group-name | ipv4-address | ipv6-address } reflect-client
Default
Neither route reflector nor client is configured.
Views
IPv6 address family view
Default command level
2: System level
Parameters
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer.
ipv6-address: IPv6 address of a peer.
Examples
# Configure the local device as a route reflector and specify the peer group test as a client.