HP VPN Firewall Appliances Network Management Command Reference

930
If neither the holdtime interval nor the keepalive interval is configured as 0, the holdtime interval must be
at least three times the keepalive interval.
The configured timers apply to all IPv6 BGP peers, but they become valid for an IPv6 BGP peer only after
the relevant IPv6 BGP connection is reset.
After this command is executed, no peer connection is closed at once. The configured hold time is used
for negotiation when a peer relationship is reestablished.
Examples
# Configure keepalive interval and holdtime interval as 60 and 180 seconds.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] timer keepalive 60 hold 180
Related commands
peer timer