HP VPN Firewall Appliances Network Management Command Reference

934
Interface : InLoop0 Cost : 0
Destination : 1:1::/64 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
For command output, see Table 210.
display ipv6 routing-table ipv6-address
Use display ipv6 routing-table ipv6-address to display information about routes to an IPv6 destination
address.
Use display ipv6 routing-table ipv6-address1 ipv6-address2 to display information about routes to a
range of IPv6 destination addresses.
Syntax
display ipv6 routing-table [ vpn-instance vpn-instance-name ] ipv6-address [ prefix-length ]
[ longer-match ] [ verbose ] [ | { begin | exclude | include } regular-expression ]
display ipv6 routing-table [ vpn-instance vpn-instance-name ] ipv6-address1 prefix-length1
ipv6-address2 prefix-length2 [ verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies a VPN by its name, a case-sensitive string of 1 to 31
characters. Without this option, the command displays routing information for the public network.
ipv6-address: Specifies an IPv6 destination address.
prefix-length: Specifies the prefix length in the range of 0 to 128.
longer-match: Displays the matched route entry with the longest prefix length.
ipv6-address1/ipv6-address2: Specifies an IPv6 destination address range.
prefix-length1/prefix-length2: Specifies the prefix length in the range of 0 to 128.
verbose: Displays detailed information about all routes. Without this keyword, the command displays
only brief information about active routes.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Executing the command with different parameters yields different output: