HP VPN Firewall Appliances Network Management Command Reference

947
permit node 6:
if-match acl6 2000
apply ipv6-address next-hop
1::1
# Display IPv6 local PBR configuration.
<Sysname> display ipv6 policy-based-route setup local
Local policy based routing configuration information:
policy-based-route: test
permit node 6:
if-match acl6 2000
apply ipv6-address next-hop
1::1
Table 216 Command output
Field Descri
p
tion
policy Name Policy name.
interface
Interface where the policy is applied. Local means the policy is
applied locally.
Interface GigabitEthernet0/1 policy
based routing configuration information
IPv6 PBR configuration on interface GigabitEthernet 0/1.
Local policy based routing configuration
information
IPv6 local PBR information.
policy-based-route Name of the referenced policy.
permit node The match mode is permit.
if-match acl6 Match IPv6 packets against IPv6 ACL.
apply ipv6-address next-hop Permitted IPv6 packets are sent to the specified next hop.
display ipv6 policy-based-route statistics
Use display ipv6 policy-based-route statistics to display IPv6 PBR statistics.
Syntax
display ipv6 policy-based-route statistics { interface interface-type interface-number | local } [ | { begin
| exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Displays IPv6 PBR statistics on the specified interface.
local: Displays IPv6 local PBR statistics.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.