HP VPN Firewall Appliances Network Management Command Reference

956
Field Descri
p
tion
List of 1 outgoing interfaces:
1: GigabitEthernet0/2
Outgoing interface list.
Interface type and number.
Matched 146754 packets(10272780
bytes), Wrong If 0 packets
(S, G)-matched packets (bytes), packets with incoming interface
errors.
Forwarded 139571 packets(9769970
bytes)
(S, G) forwarded IPv6 multicast packets (bytes).
Table 220 Major values of the Flags field (before the colon)
Value Meanin
g
0x1 Indicates that a register-stop message must be sent.
0x2
Indicates whether the IPv6 multicast source that corresponds to the
(S, G) entry is active.
0x4 Indicates a null forwarding entry.
0x8 Indicates whether the RP is a border router in an IPv6 PIM domain.
0x10 Indicates that a register outgoing interface is available.
0x400 Indicates that an (S, G) entry to be deleted.
0x8000
Indicates that the (S, G) entry is in smoothing process after
active/standby switchover.
0x10000
Indicates that the (S, G) entry has been updated during the
smoothening process.
0x80000
Indicates that the (S, G) entry has been repeatedly updated and
need to be deleted before a new entry is added.
0x100000 Indicates that the (S, G) entry was added successfully.
Table 221 Major values of the flags field (after the colon)
Value Meanin
g
0
Indicates that the entry does not belong to the main board, or the main board
has synchronized the entry to other cards.
1
Indicates that the main board will synchronize the incoming interface
information of the entry to other cards.
2
Indicates that the main board will synchronize the outgoing interface
information of the entry to other cards.
4
Indicates that the main board will synchronize the RP information of the entry
to other cards.
80
Indicates that the main board will synchronize the encapsulation group
information of the entry to other cards.
80000000 Indicates that the main board will notify other cards to add the entry.
40000000 Indicates that the main board will notify other cards to remove the entry.
Related commands
• display multicast ipv6 routing-table