HP VPN Firewall Appliances Network Management Command Reference

961
# Configure GigabitEthernet 0/1 to be the forwarding boundary of the IPv6 multicast groups in the
admin-local scope.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] multicast ipv6 boundary scope 4
Related commands
display multicast ipv6 boundary
multicast ipv6 forwarding-table downstream-limit
Use multicast ipv6 forwarding-table downstream-limit to configure the maximum number of
downstream nodes for a single entry in the IPv6 multicast forwarding table.
Use undo multicast ipv6 forwarding-table downstream-limit to restore the default.
Syntax
multicast ipv6 forwarding-table downstream-limit limit
undo multicast ipv6 forwarding-table downstream-limit
Default
The maximum number of downstream nodes for a single entry in the IPv6 multicast forwarding table is
128 .
Views
System view
Default command level
2: System level
Parameters
limit: Specifies the maximum number of downstream nodes (namely, the maximum number of outgoing
interfaces) for a single entry in the IPv6 multicast forwarding table. The value ranges from 0 to 128.
Examples
# Set the maximum number of downstream nodes for a single entry in the IPv6 multicast forwarding table
to 120.
<Sysname> system-view
[Sysname] multicast ipv6 forwarding-table downstream-limit 120
Related commands
display multicast ipv6 forwarding-table
multicast ipv6 forwarding-table route-limit
Use multicast ipv6 forwarding-table route-limit to configure the maximum number of entries in the IPv6
multicast forwarding table.
Use undo multicast ipv6 forwarding-table route-limit to restore the default.
Syntax
multicast ipv6 forwarding-table route-limit limit