HP VPN Firewall Appliances Network Management Command Reference

968
Usage guidelines
IPv6 PIM-SM must be enabled on the interface that you want to configure as a C-BSR.
Examples
# Configure the interface with an IPv6 address of 1101::1 as a C-BSR.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr 1101::1
Related commands
• c-bsr hash-length
• c-bsr priority
• c-rp
• pim ipv6 sm
c-bsr admin-scope (IPv6 PIM view)
Use c-bsr admin-scope to enable IPv6 administrative scoping.
Use undo c-bsr admin-scope to disable IPv6 administrative scoping.
Syntax
c-bsr admin-scope
undo c-bsr admin-scope
Default
IPv6 administrative scoping is disabled.
Views
IPv6 PIM view
Default command level
2: System level
Examples
# Enable IPv6 administrative scoping.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr admin-scope
Related commands
• c-bsr
• c-bsr scope
c-bsr hash-length (IPv6 PIM view)
Use c-bsr hash-length to configure the global Hash mask length.
Use undo c-bsr hash-length to restore the default.