HP VPN Firewall Appliances Network Management Command Reference

970
[Sysname] pim ipv6
[Sysname-pim6] c-bsr holdtime 150
Related commands
• c-bsr
• c-bsr interval
c-bsr interval (IPv6 PIM view)
Use c-bsr interval to configure the BS period, namely, the interval at which the BSR sends bootstrap
messages.
Use undo c-bsr interval to restore the default.
Syntax
c-bsr interval interval
undo c-bsr interval
Default
This formula determines the BS period value: BS period = (BS timeout – 10) / 2. The default BS timeout
timer is 130 seconds, so the default BS period is (130 – 10) / 2 = 60 (seconds).
Views
IPv6 PIM view
Default command level
2: System level
Parameters
interval: Specifies a BS period in seconds. The value ranges from 10 to 2147483647.
Examples
# Set the BS period to 30 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr interval 30
Related commands
• c-bsr
• c-bsr holdtime
c-bsr priority (IPv6 PIM view)
Use c-bsr priority to configure the global C-BSR priority.
Use undo c-bsr priority to restore the default.
Syntax
c-bsr priority priority
undo c-bsr priority