HP VPN Firewall Appliances Network Management Command Reference

971
Default
The C-BSR priority is 64.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
priority: Specifies the priority of the C-BSR, in the range of 0 to 255. A larger value indicates a higher
priority.
Examples
# Set the global C-BSR priority to 5.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr priority 5
Related commands
c-bsr
c-bsr scope
Use c-bsr scope to configure the C-BSR in the IPv6 admin-scoped zone.
Use undo c-bsr scope to remove the C-BSR configuration.
Syntax
c-bsr scope { scope-id | admin-local | global | organization-local | site-local } [ hash-length
hash-length | priority priority ] *
undo c-bsr scope { scope-id | admin-local | global | organization-local | site-local }
Views
IPv6 PIM view
Default command level
2: System level
Parameters
scope-id: Specifies the value of the Scope field, in the range of 3 to 15.
admin-local: Specifies the scope field value as admin-local, which has a scope value of 4.
global: Specifies the scope field value as global, which has a scope value of 14.
organization-local: Specifies the scope field value as organization-local, which has a scope value of 8.
site-local: Specifies the scope field value as site-local, which has a scope value of 5.
hash-length: Specifies the hash mask length of the IPv6 admin-scoped zone indicated by the Scope value,
in the range of 0 to 128. If you do not specify this argument, the corresponding global setting is used.