HP VPN Firewall Appliances Network Management Configuration Guide

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module

481

482

483

484

485

486

487

488

489

490

465

[RouterD] rip 1

[RouterD-rip-1] network 10.0.0.0

[RouterD-rip-1] version 2

[RouterD-rip-1] undo summary

# Configure route redistribution from RIP to IS-IS on Firewall.

[Firewall-rip-1] quit

[Firewall] isis 1

[Firewall–isis-1] import-route rip level-2

# Display IS-IS routing information on Router C.

[RouterC] display isis route

Route information for ISIS(1)

-----------------------------

ISIS(1) IPv4 Level-1 Forwarding Table

-------------------------------------

IPV4 Destination IntCost ExtCost ExitInterface NextHop Flags

--------------------------------------------------------------------------

10.1.1.0/24 10 NULL GE1/1 Direct D/L/-

10.1.2.0/24 10 NULL GE1/3 Direct D/L/-

192.168.0.0/24 10 NULL GE1/2 Direct D/L/-

Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set

ISIS(1) IPv4 Level-2 Forwarding Table

-------------------------------------

IPV4 Destination IntCost ExtCost ExitInterface NextHop Flags

--------------------------------------------------------------------------

10.1.1.0/24 10 NULL GE1/1 Direct D/L/-

10.1.2.0/24 10 NULL GE1/3 Direct D/L/-

192.168.0.0/24 10 NULL GE1/2 Direct D/L/-

10.1.4.0/24 10 NULL GE1/2 192.168.0.2 R/L/-

10.1.5.0/24 20 NULL GE1/2 192.168.0.2 R/L/-

10.1.6.0/24 20 NULL GE1/2 192.168.0.2 R/L/-

Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set

IS-IS authentication configuration example

In this example, Device A is the firewall.

Network requirements

As shown in Figure 283, Device A, Device B, Device C, and Device D reside in the same IS-IS routing

domain.

Device A, Device B, and Device C belong to Area 10, and Device D belongs to Area 20.