HP VPN Firewall Appliances Network Management Configuration Guide

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module

785

• The priority of Router B is 0, so it cannot become a DR.

• Router A has the default priority 1.

Figure 394 Network diagram

Configuration procedure

1. Configure IPv6 addresses for interfaces. (Details not shown.)

2. Configure OSPFv3 basic functions:

# Configure Firewall.

<Firewall> system-view

[Firewall] ipv6

[Firewall] ospfv3

[Firewall-ospfv3-1] router-id 1.1.1.1

[Firewall-ospfv3-1] quit

[Firewall] interface gigabitethernet 0/1

[Firewall-GigabitEthernet0/1] ospfv3 1 area 0

[Firewall-GigabitEthernet0/1] quit

# Configure Router B.

<RouterB> system-view

[RouterB] ipv6

[RouterB] ospfv3

[RouterB-ospfv3-1] router-id 2.2.2.2

[RouterB-ospfv3-1] quit

[RouterB] interface gigabitethernet 0/1

[RouterB-GigabitEthernet0/1] ospfv3 1 area 0

[RouterB-GigabitEthernet0/1] quit

# Configure Router C.

<RouterC> system-view

[RouterC] ipv6

[RouterC] ospfv3

[RouterC-ospfv3-1] router-id 3.3.3.3

[RouterC-ospfv3-1] quit

[RouterC] interface gigabitethernet 0/1

[RouterC-GigabitEthernet0/1] ospfv3 1 area 0

[RouterC-GigabitEthernet0/1] quit

Firewall

Router C

Router B

Router A

GE0/1

2001::1/64

GE0/1

2001::2/64

GE0/1

2001::3/64

GE0/1

2001::4/64