HP VPN Firewall Appliances System Management and Maintenance Command Reference

91
Examples
# Specify the console output channel as channel 0.
<Sysname> system-view
[Sysname] info-center console channel 0
info-center enable
Use info-center enable to enable the information center.
Use undo info-center enable to disable the information center.
Syntax
info-center enable
undo info-center enable
Default
The information center is enabled.
Views
System view
Default command level
2: System level
Usage guidelines
The device can output system information only after the information center is enabled.
Examples
# Enable the information center.
<Sysname> system-view
[Sysname] info-center enable
Info: Information center is enabled.
info-center format
Use info-center format to set the format of system information sent to the log host.
Use undo info-center format to restore the default.
Syntax
info-center format { unicom | china-telecom | china-unicom-nat444 }
undo info-center format
Default
System information sent to the log host is in HP format.
Views
System view
Default command level
2: System level