HP VPN Firewall Appliances System Management and Maintenance Command Reference

94
Default command level
2: System level
Usage guidelines
The following matrix shows support for the info-center logfile enable command on different firewalls and
firewall modules:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI No
F1000-E Yes
F5000 Yes
F5000-S/F5000-C Yes
VPN firewall modules Yes
20-Gbps VPN firewall modules Yes
Examples
# Enable the log file feature.
<Sysname> system-view
[Sysname] info-center logfile enable
info-center logfile frequency
Use info-center logfile frequency to configure the interval for saving system information to the log file.
Use undo info-center logfile frequency to restore the default interval.
Syntax
info-center logfile frequency freq-sec
undo info-center logfile frequency
Default
The default saving interval is 86400 seconds.
Views
System view
Default command level
2: System level
Parameters
freq-sec: Specifies the saving interval in the range of 1 to 86400 seconds.
Usage guidelines
The following matrix shows support for the info-center logfile frequency command on different firewalls
and firewall modules:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI No