HP VPN Firewall Appliances System Management and Maintenance Command Reference

97
Parameters
dir-name: Specifies a directory by its name, a string of 1 to 64 characters.
Usage guidelines
The specified directory must have been created.
The configuration made by this command cannot survive a system restart.
Usage guidelines
The following matrix shows support for the info-center logfile switch-directory command on different
firewalls and firewall modules:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI No
F1000-E Yes
F5000 Yes
F5000-S/F5000-C Yes
VPN firewall modules Yes
20-Gbps VPN firewall modules Yes
Examples
# Create a directory with the name test under the cfa0: root directory.
<Sysname> mkdir test
%Created dir cfa0:/test.
# Set the directory to save the log file to cfa0:/test.
<Sysname> system-view
[Sysname] info-center logfile switch-directory cfa0:/test
info-center loghost
Use info-center loghost to specify a log host and configure output parameters.
Use undo info-center loghost to restore the default.
Syntax
info-center loghost { ipv6 host-ipv6-address | [ vpn-instance vpn-instance-name ] host-ipv4-address }
[ port port-number ] [ channel { channel-number | channel-name } | facility local-number ] *
undo info-center loghost { ipv6 host-ipv6-address | [ vpn-instance vpn-instance-name ]
host-ipv4-address }
Default
No log host is specified.
Views
System view
Default command level
2: System level