HP VPN Firewall Appliances System Management and Maintenance Command Reference

104
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For information
about configuring a channel name, see the info-center channel name command.
Examples
# Output system information to the SNMP module through channel 6.
<Sysname> system-view
[Sysname] info-center snmp channel 6
Related commands
display snmp-agent
info-center source
Use info-center source to configure an information output rule for a module.
Use undo info-center source to remove the specified output rule.
Syntax
info-center source { module-name | default } channel { channel-number | channel-name } [ debug { level
severity | state state } * | log { level severity | state state } * | trap { level severity | state state } * ] *
undo info-center source { module-name | default } channel { channel-number | channel-name }
Default
The default output rules are listed in Table 22.
Views
System view
Default command level
2: System level
Parameters
module-name: Specifies a module. For instance, to output ARP information, specify this argument as ARP.
You can use the info-center source ? command to view the modules supported by the device.
default: Specifies all the modules, which can be displayed by using the info-center source ? command.
debug: Specifies debug information.
log: Specifies log information.
trap: Specifies trap information.
level severity: Specifies a severity level. For more information, see Table 16.
state stat
e: Specif
ies whether to output the specified system information, on (enabled) or off (disabled).
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For information
about configuring a channel name, see info-center channel name.