HP VPN Firewall Appliances System Management and Maintenance Command Reference

110
info-center trapbuffer
Use info-center trapbuffer to configure information output to the trap buffer.
Use undo info-center trapbuffer to disable information output to the trap buffer.
Syntax
info-center trapbuffer [ channel { channel-number | channel-name } | size buffersize ] *
undo info-center trapbuffer [ channel | size ]
Default
The system outputs information to the trap buffer through channel 3 (trapbuffer), and the maximum buffer
size is 256.
Views
System view
Default command level
2: System level
Parameters
size buffersize: Specifies the maximum number of trap messages allowed in the trap buffer, in the range
of 0 to 1024. The default is 256.
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For information
about configuring a channel name, see info-center channel name.
Usage guidelines
The info-center trapbuffer command takes effect only after the information center has been enabled with
the info-center enable command.
Examples
# Output system information to the trap buffer through the default channel, and set the trap buffer size to
30.
<Sysname> system-view
[Sysname] info-center trapbuffer size 30
logfile save
Use logfile save to manually save logs in the log file buffer into the log file.
Syntax
logfile save
Default
The system automatically saves logs from the log buffer to the log file at the interval configured by the
info-center logfile frequency command. The directory for the log file can be specified by using the
info-center logfile switch-directory command.
Views
Any view