HP VPN Firewall Appliances System Management and Maintenance Command Reference

113
Default
The display of debug information is disabled on both the console and the current terminal.
Views
User view
Default command level
1: Monitor level
Usage guidelines
To view debug information, execute the terminal monitor and terminal debugging commands, enable
the information center (enabled by default), and use a debugging command to enable the related
debugging.
The configuration of this command is only valid for the current connection between the terminal and the
device. If a new connection is established, the default is restored.
Examples
# Enable the display of debug information on the current terminal.
<Sysname> terminal debugging
Info: Current terminal debugging is on.
terminal logging
Use terminal logging to enable the display of log information on the current terminal.
Use undo terminal logging to disable the display of log information on the current terminal.
Syntax
terminal logging
undo terminal logging
Default
The display of log information is enabled both on the console and the current terminal.
Views
User view
Default command level
1: Monitor level
Usage guidelines
To view log information, execute the terminal monitor and terminal logging commands, and then enable
the information center (enabled by default).
The configuration of this command is only valid for the current connection between the terminal and the
device. If a new connection is established, the default is restored.
Examples
# Disable the display of log information on the current terminal.
<Sysname> undo terminal logging
Info: Current terminal logging is off.