HP VPN Firewall Appliances System Management and Maintenance Command Reference

125
orgtime: 10:56:22.442 UTC Aug 7 2009(CE2686D6.71484513)
rcvtime: 10:56:22.442 UTC Aug 7 2009(CE2686D6.7149E881)
xmttime: 10:56:22.442 UTC Aug 7 2009(CE2686D6.71464DC2)
filter delay : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
filter offset: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
filter disper: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
reference clock status: working abnormally
timecode:
Total associations : 1
Table 25 Command output
Field Descri
p
tion
clock source IP address of the clock source.
clock stratum
Stratum level of the clock source, which determines the clock precision. The
value is in the range of 1 to 16. The clock precision decreases from stratum 1
to stratum 16. A stratum 1 clock has the highest precision, and a stratum 16
clock is not synchronized.
clock status
Status of the clock source corresponding to this session:
• configured—The session was created by a configuration command.
• dynamic—This session is established dynamically.
• master—The clock source is the primary reference source of the current
system.
• selected—The clock source has survived the clock selection algorithm.
• candidate—The clock source is the candidate reference source.
• sane—The clock source has passed the sane authentication.
• insane—The clock source has failed the sane authentication.
• valid—The clock source is valid, which means the clock source meet the
following requirements: it has passed the authentication and is being
synchronized, its stratum level is valid, and its root delay and root
dispersion values are within their ranges.
• invalid—The clock source is invalid.
• unsynced—The clock source has not been synchronized or the value of the
stratum level is invalid.
reference clock ID
Reference clock ID of the clock source:
• If the reference clock is the local clock, the value of this field is related to the
stratum level of the clock source:
{ When the stratum level of the clock source is 0 or 1, this field is LOCL.
{ When the stratum level of the clock source has another value, this field is
the IP address of the local clock.
• If the reference clock is the clock of another device on the network, the value
of this field is the IP address of that device.