HP VPN Firewall Appliances System Management and Maintenance Command Reference

127
Field Descri
p
tion
reftime Reference timestamp in the NTP message.
orgtime Originate timestamp in the NTP message.
rcvtime Receive timestamp in the NTP message.
xmttime Transmit timestamp in the NTP message.
filter delay Delay information.
filter offset Offset information.
filter disper Dispersion information.
reference clock status
Status of the reference clock:
• working normally.
• working abnormally.
timecode Time code.
Total associations Total number of associations.
When a device is operating in NTP broadcast/multicast server mode, using the display ntp-service
sessions command on the device does not display NTP session information corresponding to the
broadcast/multicast server, but the sessions are counted in the total number of associations.
display ntp-service status
Use display ntp-service status to display NTP service status information.
Syntax
display ntp-service status [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display NTP service status information.
<Sysname> display ntp-service status
Clock status: unsynchronized
Clock stratum: 16
Reference clock ID: none