HP VPN Firewall Appliances System Management and Maintenance Command Reference

160
Group name: testv1
Storage-type: nonVolatile
Table 34 Command output
Field Descri
p
tion
Community name
Displays the community name created by using the snmp-agent community
command or the username created by using the snmp-agent usm-user { v1 |
v2c } command.
Group name
SNMP group name:
• If the community is created by using the snmp-agent community command,
the group name is the same as the community name.
• If the community is created by using the snmp-agent usm-user { v1 | v2c }
command, the name of the group to which the user belongs is displayed.
Acl
Number of the ACL that controls the access of the NMSs in the community to
the device.
Only the NMSs with the IP addresses permitted in the ACL can access the
device with the community name.
Storage-type
Storage type:
• volatile—Settings are lost when the system reboots.
• nonVolatile—Settings remain after the system reboots.
• permanent—Settings remain after the system reboots and can be modified
but not deleted.
• readOnly—Settings remain after the system reboots and cannot be
modified or deleted.
• other—Any other storage type.
Related commands
• snmp-agent community
• snmp-agent usm-user { v1 | v2c }
display snmp-agent group
Use display snmp-agent group to display information about an SNMP group, including the group name,
security model, MIB view, and storage type.
Syntax
display snmp-agent group [ group-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
group-name: Specifies an SNMP group name, a case-sensitive string of 1 to 32 characters. You can
specify an SNMPv1, SNMPv2c, or SNMPv3 group.