HP VPN Firewall Appliances System Management and Maintenance Command Reference
182
snmp-agent trap enable
Use snmp-agent trap enable to enable traps globally.
Use undo snmp-agent trap enable to disable traps globally.
Syntax
snmp-agent trap enable [ bfd | bgp | configuration | default-route | flash | ospf [ process-id ]
[ ifauthfail | ifcfgerror | ifrxbadpkt | ifstatechange | iftxretransmit | lsdbapproachoverflow |
lsdboverflow | maxagelsa | nbrstatechange | originatelsa | vifcfgerror | virifauthfail | virifrxbadpkt
| virifstatechange | viriftxretransmit | virnbrstatechange ] * | pim [ candidatebsrwinelection |
electedbsrlostelection | interfaceelection | invalidjoinprune | invalidregister | neighborloss |
rpmappingchange ] * | standard [ authentication | coldstart | linkdown | linkup | warmstart ]* |
system | vrrp [ authfailure | newmaster ] ]
undo snmp-agent trap enable [ bfd | bgp | configu
ration | default-route | flash | ospf [ pr
ocess-id ]
[ ifauthfail | ifcfgerror | ifrxbadpkt | ifstatechange | iftxretransmit | lsdbapproachoverflow |
lsdboverflow | maxagelsa | nbrstatechange | originatelsa | vifcfgerror | virifauthfail | virifrxbadpkt
| virifstatechange | viriftxretransmit | virnbrstatechange ] * | pim [ candidatebsrwinelection |
electedbsrlostelection | interfaceelection | invalidjoinprune | invalidregister | neighborloss |
rpmappingchange ] * | standard [ authentication | coldstart | linkdown | linkup | warmstart ]* |
system | vrrp [ authfailure | newmaster ] ]
Default
By default, all supported traps are enabled except for the default-route trap.
Views
System view
Default command level
3: Manage level
Parameters
bfd: Enables SNMP traps for the BFD module.
The following matrix shows the bfd keyword and hardware compatibility:
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 Yes
F5000-S/F5000-C No
VPN firewall modules No
20-Gbps VPN firewall modules No
bgp: Enables SNMP traps for the BGP module.
configuration: Enables configuration traps.
default-route: Enables default route traps, which are sent when default routes are deleted.
flash: Enables Flash-related SNMP traps.