HP VPN Firewall Appliances System Management and Maintenance Command Reference

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module

191

192

193

194

195

196

197

198

199

200

183

ospf: Enables SNMP traps for the OSPF module.

• process-id: OSPF process ID in the range of 1 to 65535.

• ifauthfail: Interface authentication failure traps.

• ifcfgerror: Interface configuration error traps.

• ifrxbadpkt: Traps for receiving incorrect packets.

• ifstatechange: Interface state change traps.

• iftxretransmit: Traps for packet receiving and forwarding events on interfaces.

• lsdbapproachoverflow: Traps for approaching LSDB overflow.

• lsdboverflow: LSDB overflow traps.

• maxagelsa: Traps for LSA max age.

• nbrstatechange: Traps for neighbor state change.

• originatelsa: Traps for local LSA generation.

• vifcfgerror: Traps for virtual interface configuration error.

• virifauthfail: Traps for virtual interface authentication failure.

• virifrxbadpkt: Traps for virtual interface receiving error packets.

• virifstatechange: Traps for virtual interface state changes.

• viriftxretransmit: Traps for virtual interface receiving and forwarding packets.

• virnbrstatechange: Traps for neighbor state change of the virtual interface.

pim: Enables SNMP traps for the PIM module.

• candidatebsrwinelection: Traps for the winning of a candidate-bootstrap router (C-BSR) in

bootstrap router (BSR) election.

• electedbsrlostelection: Traps for losing the BSR election.

• interfaceelection: Traps for the election of a new DR or DF on an interface.

• invalidjoinprune: Traps for receiving invalid join or prune packets.

• invalidregister: Traps for receiving invalid registration packets.

• neighborloss: Traps for the lost of a neighbor.

• rpmappingchange

: Traps for the change of the current RP-set.

standar

d: Standar

d traps.

• authentication: Enables sending authentication failure traps in the event of authentication failure.

• coldstart: Sends coldstart traps when the device restarts.

• linkdown: Globally enables sending linkDown traps when the link of a port goes down.

• linkup: Globally enables sending linkUp traps when the link of a port goes up.

• warmstart: Sends warmstart traps when the SNMP restarts.

system: Enables system event (private MIB) traps.

vrrp: Enables traps for the VRRP module.

• authfailure: VRRP authentication failure traps.

• newmaster: VRRP newmaster traps, which are sent when the device becomes the master.