HP VPN Firewall Appliances System Management and Maintenance Command Reference

218
Default
An SFTP client uses the IP address of the interface specified by the route of the device to access the SFTP
server.
Views
System view
Default command level
3: Manage level
Parameters
interface interface-type interface-number: Specifies a source interface by its type and number.
ip ip-address: Specifies a source IPv4 address.
Usage guidelines
To make sure the SFTP client and the SFTP server can communicate with each other, and to improve the
manageability of SFTP clients in the authentication service, HP recommends that you specify a loopback
interface or dialer interface as the source interface.
Examples
# Specify the source IP address of the SFTP client as 192.168.0.1.
<Sysname> system-view
[Sysname] sftp client source ip 192.168.0.1
Related commands
display sftp client source
sftp ipv6
Use sftp ipv6 to establish a connection to an IPv6 SFTP server and enter SFTP client view.
Syntax
In non-FIPS mode:
sftp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key { dsa | rsa } |
prefer-compress { zlib | zlib-openssh } | prefer-ctos-cipher { 3des | aes128 | aes256 | des } |
prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange | dh-group1
| dh-group14 } | prefer-stoc-cipher { 3des | aes128 | aes256 |des } | prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ] *
In FIPS mode:
sftp ipv6 server [ port-number ] [ identity-key rsa | prefer-ctos-cipher { aes128 | aes256 } |
prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher { aes128 | aes256 }
| pr
efer-stoc-hmac { sha1 | sha1
-96 } ] *
Views
User view
Default command level
3: Manage level