HP VPN Firewall Appliances System Management and Maintenance Command Reference

230
Parameters
max-entries: Specifies the maximum number of sessions that can be set up on a non-default VD.
The following matrix shows the value range for the max-entries argument on different firewalls and
firewall modules:
Hardware Value ran
g
e
F1000-A-EI/F1000-S-EI 0 to 1200000
F1000-E 0 to 500000
F5000 0 to 4000000
F5000-S/F5000-C 0 to 2200000
VPN firewall modules 0 to 1100000
20-Gbps VPN firewall modules 0 to 1100000
Usage guidelines
Use this command to put a limit on the maximum of sessions that can be set up on a non-default VD. The
actual number of sessions available for a non-default VD, however, is also restricted by the number of
sessions available on the physical device.
The maximum of sessions that can be set up on the default VD equals the maximum number of sessions
supported by the physical device.
Examples
# Set the maximum number of sessions to 5000 for VD test.
<Sysname> system-view
[Sysname] vd test id 2
[Sysname-vd-test] limit-resource session max-entries 5000
Related commands
vd
session max-entries
Use session max-entries to set the maximum number of concurrent sessions that can be set up on a VD.
Use undo session max-entries to restore the default.
Syntax
session max-entries max-entries
undo session max-entries
Default
The maximum number of concurrent sessions for the default VD equals the maximum number of sessions
supported by the physical device, and the maximum number of concurrent sessions for a non-default VD
equals the maximum number of sessions specified for the VD by using the limit-resource session
max-entries command.
Views
System view, VD system view