HP VPN Firewall Appliances System Management and Maintenance Command Reference

231
Default command level
2: System level
Parameters
max-entries: Specifies the maximum number of concurrent sessions that can be set up on a VD.
The following matrix shows the value range for the max-entries argument on different firewalls and
firewall modules:
Hardware Value ran
g
e
F1000-A-EI/F1000-S-EI 1 to 1200000
F1000-E 1 to 500000
F5000 1 to 4000000
F5000-S/F5000-C 1 to 2200000
VPN firewall modules 1 to 1100000
20-Gbps VPN firewall modules 1 to 1100000
Usage guidelines
To set the maximum number of concurrent sessions for the default VD, use this command in system view.
To set the maximum number of concurrent sessions for a non-default VD, log in to the VD and use this
command in VD system view.
The maximum number of concurrent sessions for a VD cannot exceed the maximum number of sessions
specified for the VD.
Examples
# Set the maximum number of concurrent sessions to 2000 for the default VD.
<Sysname> system-view
[Sysname] session max-entries 2000
# Set the maximum number of concurrent sessions to 3000 for VD test.
<Sysname> system-view
[Sysname] switchto vd test
[Sysname-vsys-test] session max-entries 3000
Related commands
• vd
• switchto
switchto
Use switchto to log in to a non-default VD from the system view of the default VD and enter VD system
view.
Syntax
switchto vd vd-name
Views
System view