HP VPN Firewall Appliances System Management and Maintenance Command Reference

232
Default command level
2: System level
Parameters
vd-name: Specifies the VD name, a case-insensitive string of 1 to 20 characters.
Usage guidelines
To return from a VD system view to the system view of the default VD, use the quit command.
Examples
# Enter the system view of existing VD test.
<Sysname> system-view
[Sysname] switchto vd test
[Sysname-vsys-test]
# Return to system view.
<Sysname> system-view
[Sysname] switchto vd test
[Sysname-vsys-test] quit
[Sysname]
vd
Use vd to create a non-default VD and enter VD view. If the VD already exists, you enter the VD view
directly.
Use undo vd to delete a VD.
Syntax
vd vd-name [ id vd-id ]
undo vd vd-name [ id vd-id ]
Default
There is a default VD with the name Root and the ID 1.
Views
System view
Default command level
2: System level
Parameters
vd-name: Specifies the VD name, a case-insensitive string of 1 to 20 characters that contains no question
mark (?), less-than sign (<), greater-than sign (>), backward slash (\), quotation mark ("), percentage
sign (%), apostrophe ('), ampersand (&), or number sign (#).
vd-id: Specifies the VD ID.
The following matrix shows the value range for the vd-id argument on different firewalls and firewall
modules: