HP VPN Firewall Appliances System Management and Maintenance Command Reference

246
[ftp] quit
<Sysname> more aa.txt
-rwxrwxrwx 1 noone nogroup 3077 Jun 20 15:34 router.cfg
disconnect
Use disconnect to disconnect from the remote FTP server but remain in FTP client view.
Syntax
disconnect
Views
FTP client view
Default command level
3: Manage level
Usage guidelines
This command is equal to the close command.
Examples
# Disconnect from the remote FTP server but remain in FTP client view.
[ftp] disconnect
221 Server closing.
[ftp]
display ftp client configuration
Use display ftp client configuration to display the source IP address configuration of the FTP client.
Syntax
display ftp client configuration [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the chapter on CLI in Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If the specified source IP address is active, this command displays the source IP address. If the specified
source interface is active, this command displays the source interface.