Manualshelf

HP VPN Firewall Appliances System Management and Maintenance Command Reference

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
261262263264265266267268269270
253
[ftp] mkdir mytest
257 "/mytest" new directory created.
[ftp]
open
Use open to log in to the IPv4 FTP server under FTP client view.
Syntax
open server-address [ service-port ]
Views
FTP client view
Default command level
3: Manage level
Parameters
server-address: IP address or host name of a remote FTP server.
service-port: Port number of the remote FTP server, in the range of 0 to 65535. The default value is 21.
Usage guidelines
At login, enter the username and password. If your input is correct, the login succeeds.
If you have logged in to the IPv4 FTP server, you cannot use the open command to log in to another server.
To do so, you must disconnect from the current server first.
Examples
# In FTP client view, log in to the FTP server at 192.168.1.50.
<Sysname> ftp
[ftp] open 192.168.1.50
Trying 192.168.1.50 ...
Press CTRL+K to abort
Connected to 192.168.1.50.
220 FTP service ready.
User(192.168.1.50:(none)):aa
331 Password required for aa.
Password:
230 User logged in.
[ftp]
Related commands
close
open ipv6
Use open ipv6 to log in to the IPv6 FTP server in FTP client view.