HP VPN Firewall Appliances System Management and Maintenance Command Reference

268
Examples
# Specify the ACS URL http://www.acs.com:80/acs.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] cwmp acs url http://www.acs.com:80/acs
cwmp acs username
Use cwmp acs username to configure the username used for connecting to the ACS.
Use undo cwmp acs username to restore the default.
Syntax
cwmp acs username username
undo cwmp acs username
Default
No username is configured for connecting to the ACS.
Views
CWMP view
Default command level
2: System level
Parameters
username: Specifies the username used for authentication when the CPE connects to the ACS. This
argument must be a case-sensitive string of 1 to 255 characters.
Usage guidelines
If you use the command multiple times, the most recent configuration takes effect.
The undo cwmp acs username command removes both the username and password used for connecting
to the ACS.
Examples
# Configure the username used for connecting to the ACS as newname.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] cwmp acs username newname
Related commands
cwmp acs password
cwmp cpe connect retry
Use cwmp cpe connect retry to configure the maximum number of attempts the CPE can make to retry a
connection.
Use undo cwmp cpe connect retry to restore the default.