HP VPN Firewall Appliances System Management and Maintenance Command Reference

271
cwmp cpe inform time
Use cwmp cpe inform time to configure the CPE to send an Inform message at a specified time.
Use undo cwmp cpe inform time to restore the default.
Syntax
cwmp cpe inform time time
undo cwmp cpe inform time
Default
The CPE is not configured to send an Inform message at a specific time.
Views
CWMP view
Default command level
2: System level
Parameters
time: Time at which the CPE sends an Inform message. The specified time must be in the format of
yyyy-mm-ddThh:mm:ss, and in the range of 1970-01-01T00:00:00 to 2105-12-31T23:59:59. The
specified time must be greater than the current system time.
Examples
# Configure the CPE to send an Inform message at 2012-12-01T20:00:00.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe inform time 2012-12-01T20:00:00
cwmp cpe password
Use cwmp cpe password to configure the password used for authentication when the ACS connects to
the CPE.
Use undo cwmp cpe password to restore the default.
Syntax
cwmp cpe password [ cipher | simple ] password
undo cwmp cpe password
Default
No password is configured for connecting to the CPE.
Views
CWMP view
Default command level
2: System level
Parameters
cipher: Specifies a ciphertext password.