HP VPN Firewall Appliances System Management and Maintenance Command Reference

272
simple: Specifies a plaintext password.
password: Specifies the password string. This argument is case sensitive. If simple is specified, it must be
a string of 1 to 255 characters. If cipher is specified, it must be a ciphertext string of 1 to 373 characters.
If neither cipher nor simple is specified, you set a plaintext password string.
Usage guidelines
Make sure the CPE username and password are the same as configured on the ACS. If not, the ACS
cannot establish a CWMP connection to the CPE.
If you use the command multiple times, the password configured most recently takes effect.
For security purposes, all keys, including keys configured in plain text, are saved in cipher text.
Examples
# Configure the password used for connecting to the CPE as newpsw.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe password newpsw
Related commands
cwmp cpe username
cwmp cpe username
Use cwmp cpe username to configure the username used for authentication when the ACS connects to
the CPE.
Use undo cwmp cpe username to restore the default.
Syntax
cwmp cpe username username
undo cwmp cpe username
Default
No username is configured for connecting to the CPE.
Views
CWMP view
Default command level
2: System level
Parameters
username: Specifies the username used for authentication when the ACS connects to the CPE. This
argument must be a case-sensitive string of 1 to 255 characters.
Usage guidelines
If you configure the cwmp cpe username command multiple times, the most recent configuration takes
effect.
The undo cwmp cpe username command removes both the username and password used for connecting
to the CPE.