HP VPN Firewall Appliances System Management and Maintenance Command Reference

273
Examples
# Configure the username used for connecting to the CPE as newname.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe username newname
Related commands
cwmp cpe password
cwmp cpe wait timeout
Use cwmp cpe wait timeout to configure the close-wait timer for the CPE to close the idle connection to
ACS.
Use undo cwmp cpe wait timeout to restore the default.
Syntax
cwmp cpe wait timeout seconds
undo cwmp cpe wait timeout
Default
The CPE close-wait timer is 30 seconds.
Views
CWMP view
Default command level
2: System level
Parameters
seconds: Sets the CPE close-wait timer in the range of 30 to 1800 seconds.
Usage guidelines
The close-wait timer specifies how long the connection to the ACS can be idle before it is shut down. If
no data is transmitted over the connection before the timer expires, the CPE disconnects the connection
to the ACS.
Examples
# Configure the CPE close-wait timeout as 60 seconds.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe wait timeout 60
cwmp device-type
Use cwmp device-type to configure the CPE working mode of the device.
Use undo cwmp device-type to restore the default.
Syntax
cwmp device-type { device | gateway }