HP VPN Firewall Appliances System Management and Maintenance Command Reference

274
undo cwmp device-type
Default
The device works in gateway mode.
View
CWMP view
Default level
2: System level
Parameters
device: Sets the device to operate in device mode. Use this keyword if no lower-level CPEs attach to the
device.
gateway: Sets the device to operate in gateway mode. If the device is the egress to the WAN and has
CPEs attached to it, use this keyword to enable the ACS to manage the device and all the attached CPEs.
Examples
# Configure the device to operate in gateway mode.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] undo cwmp enable
[Sysname-cwmp] cwmp device-type gateway
[Sysname-cwmp] cwmp enable
cwmp enable
Use cwmp enable to enable CWMP.
Use undo cwmp enable to disable CWMP.
Syntax
cwmp enable
undo cwmp enable
Default
CWMP is enabled.
Views
CWMP view
Default command level
2: System level
Usage guidelines
CWMP cannot be disabled when the CPE or ACS is performing an uploading or download operation.
Examples
# Disable CWMP when no upload or download operation is being performed.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] undo cwmp enable