HP VPN Firewall Appliances System Management and Maintenance Command Reference

276
Field Descri
p
tion
Wait timeout
Close-wait timer. It sets how long the connection to the ACS can be
idle before it is shut down. If no data has been transmitted over the
connection before the timer expires, the CPE disconnects the
connection to the ACS.
Reconnection times Number of attempts the CPE can make to retry a connection.
Source IP interface
Interface connecting to the ACS on the CPE. You can set this
interface with the cwmp cpe connect interface command.
display cwmp status
Use display cwmp status to display the current status of CWMP.
Syntax
display cwmp status [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display CWMP status after CWMP is disabled.
<Sysname> display cwmp status
CWMP is disabled.
# Display CWMP status after CWMP is enabled.
<Sysname> display cwmp status
TR-069 is enabled.
ACS URL :http://www.acs.com:80/acs
ACS information is set by :user
ACS username :newname
Connection status :disconnected
Data transfer status :none
Time of last successful connection :none
Interval upon to next connection :1096832s