HP VPN Firewall Appliances System Management and Maintenance Command Reference

277
Table 50 Command output
Field Descri
p
tion
ACS URL URL of the ACS. It is displayed as null if not configured.
ACS information is set by
Mode through which CWMP gets the ACS URL. It is displayed as
null if ACS URL is not configured.
• user—The ACS URL is configured through CLI.
• config file—The ACS URL is configured through ACS.
• DHCP—The ACS URL is configured through DHCP.
ACS username
Authentication username for connecting to the ACS. It is
displayed as null if not configured.
Connection status
Connection status:
• connected—The connection is established.
• disconnected—The connection is not established.
• waiting response—The device is waiting for a response.
Data transfer status
Data transfer status:
• uploading—The device is uploading data.
• downloading—The device is downloading data.
• none—The device is not transferring data.
Time of last successful connection
Time at which the last successful connection was established. If
there is no successful connection, it is displayed as none.
Interval upon to next connection
Period of time after which the device will initiate a connection. If
no interval or time is configured for Inform message sending, it is
displayed as null.
ssl client-policy
Use ssl client-policy to specify an SSL client policy for the CPE to authenticate the ACS for setting up an
HTTPS connection.
Use undo ssl client-policy to remove the SSL client policy from the CWMP configuration.
Syntax
ssl client-policy policy-name
undo ssl client-policy
Default
No SSL client policy is specified.
View
CWMP view
Default level
2: System level
Parameters
policy-name: Specifies an SSL client policy name, a case-insensitive string of 1 to 16 characters. For
information about configuring SSL client policies, see Network Management Configuration Guide.