HP VPN Firewall Appliances System Management and Maintenance Command Reference

34
Hardware Com
p
atibilit
y
20-Gbps VPN firewall modules No
Examples
# Display the location of the file test.cfg in the NAND Flash memory.
<Sysname> display nandflash file-location test.cfg
Logical Chunk Physical Page
---------------------------
chunk(0) 1234
chunk(1) 1236
chunk(2) 1235
filename: test.cfg
Table 8 Command output
Field Descri
p
tion
Logic Chunk Serial number of the logical pages.
Physical Page Serial number of the physical pages.
chunk(0) 1234
The first logical page of this file corresponds to the 1234th physical page
on the device.
display nandflash badblock-location
Use display nandflash badblock-location to display the number and location of bad blocks in the NAND
Flash memory.
Syntax
display nandflash badblock-location [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
3: Manage level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the chapter on CLI in Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
The following matrix shows the display nandflash badblock-location command and hardware
compatibility: