HP VPN Firewall Appliances System Management and Maintenance Command Reference

39
// Enter 127 to specify the size of the second partition as 127 MB.
The remaining space is less than 32MB. Please reenter the size of partition 2.
Partition 2 (32MB~96MB, 128MB, CTRL+C to quit, Enter to use all space left):
// Enter 56 to respecify the size of the second partition as 56 MB.
Partition 3 (32MB~40MB, 72MB, CTRL+C to quit, Enter to use all space left):
// Press Enter to assign the remaining space to the third partition.
cfa: will be divided into the following partition(s):
DeviceName Capacity
cfa0: 128MB
cfa1: 56MB
cfa2: 72MB
All data on cfa: will be lost, proceed with fdisk? [Y/N]:y
% Now begin to fdisk cfa:, please wait... done.
Reset (default) paths for files as needed, such as log file, ftp root directory, etc.
file prompt
Use file prompt to set the file operation mode.
Syntax
file prompt { alert | quiet }
Default
The operation mode is alert.
Views
System view
Default command level
3: Manage level
Parameters
alert: Enables the system to warn you about operations that might bring undesirable results such as file
corruption or data loss.
quiet: Disables the system from warning you about any operation.
Usage guidelines
When the operation mode is set to quiet, the system does not warn for any file operation. To avoid
problems, use the alert mode.
Examples
# Set the file system operation mode to alert.
<Sysname> system-view
[Sysname] file prompt alert
fixdisk
Use fixdisk to examine a storage medium for damage and repair any damage.