HP VPN Firewall Appliances System Management and Maintenance Command Reference

56
Default command level
3: Manage level
Parameters
patch-number: Specifies the sequence number of a patch. The value rang is 1 to 200. If no sequence
number is specified, this command removes all patches in the patch memory area. If a sequence number
is specified, this command removes the specified patch and all its subsequent patches.
Usage guidelines
This command does not delete patches from the storage medium. After being removed from the patch
memory area, the patches changes to the IDLE state.
Examples
# Remove patch 3 and all its subsequent patches from the patch memory area.
<Sysname> system-view
[Sysname] patch delete 3
# Remove all patches from the patch memory area.
<Sysname> system-view
[Sysname] patch delete
patch install
Use patch install to install and run patches in one step.
Use undo patch install to remove all ACTIVE and RUNNING patches from the patch memory area.
Syntax
patch install { patch-location | file filename }
undo patch install
Views
System view
Default command level
3: Manage level
Parameters
patch-location: Specifies the patch file path, a string of 1 to 64 characters. The file must be saved in the
root directory of the storage medium. Provide this argument if the patch file is not packaged in a patch
package file, and make sure the file name is correct.
file filename: Specifies a patch package file name.
Usage guidelines
Before installing patches, save the patch file or patch package file to the root directory of the storage
medium on the device.
If the storage medium has been partitioned, save the file on the first partition.
The patch install command changes the state of installed patches from IDLE to ACTIVE or RUNNING,
depending on your choice during the command execution process. If you choose to have installed
patches continue to run after a reboot, the installed patches are set in RUNNING state and remain in this