HP VPN Firewall Appliances System Management and Maintenance Command Reference

57
state after a reboot. If not, the installed patches are set in ACTIVE state and change to the DEACTIVE state
at a reboot.
The undo patch install command change the state of ACTIVE and RUNNING patches to IDLE, but does
not delete them from the storage medium.
If you execute the patch install patch-location command, the directory specified for the patch-location
argument replaces the directory specified with the patch location command after the upgrade is
complete.
If you execute the patch install file patch-package command, the directory specified with the patch
location command does not change.
In FIPS mode, the patch file or patch package file must pass authenticity verification before the patch
install command can be executed.
Examples
# Install files from the CF card.
<Sysname> system-view
[Sysname] patch-install cfa0:
Patches will be installed. Continue? [Y/N]:y
Do you want to continue running patches after reboot? [Y/N]:y
Installing patches..
Installation completed, and patches will continue to run after reboot.
[Sysname]
# Install patches from a patch package file.
<Sysname> system-view
[Sysname] patch install file:/patch_packeg.bin
Patches will be installed. Continue? [Y/N]:y
Do you want to run patches after reboot? [Y/N]:y
Installing patches..
Installation completed, and patches will continue to run after reboot.
[Sysname]
patch load
Use patch load to load patches from the storage medium to the patch memory area.
Syntax
patch load [ file filename ]
Default
The system loads the patch file from the storage medium.
Views
System view
Default command level
3: Manage level