HP VPN Firewall Appliances System Management and Maintenance Command Reference

59
Examples
# Specify the root directory of the CF card as the patch file location.
<Sysname> system-view
[Sysname] patch location cfa0:
patch run
Use patch run to confirm ACTIVE patches.
Syntax
patch run [ patch-number ]
Views
System view
Default command level
3: Manage level
Parameters
patch-number: Specifies the sequence number of a patch. The value range is 1 to 200. If no sequence
number is specified, this command confirms all ACTIVE patches and changes their state to RUNNING.
If a sequence number is specified, this command confirms the specified ACTIVE patch and all its previous
patches, and changes their state to RUNNING.
Usage guidelines
After being confirmed, ACTIVE patches are set in RUNNING state and can continue to run after a reboot.
If not being confirmed, ACTIVE patches are set in DEACTIVE state at a reboot.
Examples
# Confirm patch 3 and all its previous ACTIVE patches.
<Sysname> system-view
[Sysname] patch run 3
# Confirm all ACTIVE patches.
<Sysname> system-view
[Sysname] patch run