HP VPN Firewall Appliances System Management and Maintenance Command Reference

70
Related commands
• display saved-configuration
• reset saved-configuration
• save
display default-configuration
Use display default-configuration to display the factory defaults.
Syntax
display default-configuration [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The device is shipped with some basic settings called "factory defaults." These default settings make sure
the device can start up and run correctly when it has no configuration file or the configuration file is
corrupted.
Factory defaults vary with device models and might differ from the default settings of commands.
Examples
# Display the factory defaults.
<Sysname> display default-configuration
Related commands
• display current-configuration
• display saved-configuration
display saved-configuration
Use display saved-configuration to display the contents of the configuration file to be used at the next
startup.
Syntax
display saved-configuration [ by-linenum ] [ | { begin | exclude | include } regular-expression ]